Hi There,
I know the most annoying thing I find with Sure cuts a lot is the fact that my Font window, Shape Window and the mat do not click in all together so that I can just scroll on the matt and keep my font up on the side. It would be really nice if this could just be one big window with the option of addding the font window or the shape windows to the side or bottom so that you don't have to keep moving them all around..
Also,
It would be nice if the numbers on the mat were rearraged to match the actual measurements on the cutting mats.. They are currently backwards..
Windows!!
Re: Windows!!
I so agree on having a new, more professional user interface.
In SCAL, the display shows x,y coordinates and matches the left and right sides and the top and bottom sides perfectly. If you look at the first horizontal line, it is numbered 1 on both the left and right sides, whereas the physical mat shows the first horizontal line as 1 on the left and 6 (for the 6x12 mat). So, in SCAL, 1 is always 1, but on the Circut mat, 1 is either 1 or 5 depending on which side of the mat you look. I prefer 1 = 1 and 5 = 5 as is shown in SCAL.
In SCAL, the display shows x,y coordinates and matches the left and right sides and the top and bottom sides perfectly. If you look at the first horizontal line, it is numbered 1 on both the left and right sides, whereas the physical mat shows the first horizontal line as 1 on the left and 6 (for the 6x12 mat). So, in SCAL, 1 is always 1, but on the Circut mat, 1 is either 1 or 5 depending on which side of the mat you look. I prefer 1 = 1 and 5 = 5 as is shown in SCAL.