Craft Edge

Hi
Been trying hard to convert this image into a svg, could anyone please help?

here you go. download the file again just did a adjustment and i did cut it out no problems with peices falling out that were not supposed to.

Thanks Rachell. Just tried to cut this and some of the fancy edge is not joined up even though the image shows it all together.
Have you cut this out?

stephie911 wrote:Thanks Rachell. Just tried to cut this and some of the fancy edge is not joined up even though the image shows it all together.
Have you cut this out?

which machine are you using ? are you sure your blade is not to far out and possible cutting it where it shouldn't be.

I'm not sure if you still this, but I traced it anyway. There's a couple of versions for you to choose from. HTH

Rachelle, I'm using my new expression machine. What do you mean by the blade to far out?

thanks for your input, much appreciated. will let you know how I get on tomorrow cutting this, need to go bed now,been a long day.

Cuts great, thanks all for the help

I'm attaching another version of the butterfly with both sides lacy. This was an idea was inspired by Sandy's cut-out of this butterfly on the Re-Nu post. Thank Sandy!

viewtopic.php?f=6&t=27643