If eCAL won't start...
Posted: Fri Mar 01, 2013 9:42 pm
If your copy of eCAL is not starting up and just quickly flashes the opening logo screen and then closes, make sure you have the latest 1.013 (or higher) installed from
http://www.craftedge.com/download
If after installing the update and it still does not start, please try the following:
Immediately after starting Sure Cuts A Lot, hold down the 'D' key on the keyboard in Windows or the 'Control" key on a Mac. Keep it held down and after a few seconds, it should ask to load default settings. Click ok and see if it loads then.
http://www.craftedge.com/download
If after installing the update and it still does not start, please try the following:
Immediately after starting Sure Cuts A Lot, hold down the 'D' key on the keyboard in Windows or the 'Control" key on a Mac. Keep it held down and after a few seconds, it should ask to load default settings. Click ok and see if it loads then.