Print & Cut with SCAL...QUICK written tutorial
Posted: Sun Jun 05, 2011 8:15 am
In a nutshell:
Use 'Place Image' in SCAL to bring in a picture.
Make sure the 'Show Outlines Only' is not checked.
Also do a trace of this picture for the outline.
Have the picture and the outline on the mat and turn on and off with the eye in the 'Layers'.
Print this picture FROM Scal.
Calibrate properly 'E' http://forums.surecutsalot.com/viewtopi ... with+2.041
Put the picture on the mat normally along the edge lines.
Turn off the picture and cut the outline.
Use 'Place Image' in SCAL to bring in a picture.
Make sure the 'Show Outlines Only' is not checked.
Also do a trace of this picture for the outline.
Have the picture and the outline on the mat and turn on and off with the eye in the 'Layers'.
Print this picture FROM Scal.
Calibrate properly 'E' http://forums.surecutsalot.com/viewtopi ... with+2.041
Put the picture on the mat normally along the edge lines.
Turn off the picture and cut the outline.