SCAL 6 Change registration Mark default print setting

Post Reply
Hairac
Posts: 1
Joined: Thu Aug 18, 2022 1:52 am

SCAL 6 Change registration Mark default print setting

Post by Hairac »

Hi all! There's a way to make the "print registration marks" setting in the print menù to be always checked by default? I often forget to check it and i rarely do not use reg marks, so i'd love to not have to worry about it.
Thank you!
SandyMcC
Posts: 1117
Joined: Mon May 09, 2011 7:01 am

Re: SCAL 6 Change registration Mark default print setting

Post by SandyMcC »

You don't mention which cutter you're using but for all of the models I personally support, if you wait to print once you've entered the Print+Cut window, then Print Registration Marks WILL always be enabled:
1.png
1.png (31.54 KiB) Viewed 12554 times
2.png
2.png (14.47 KiB) Viewed 12554 times

Note that it makes sense for it to work this way because we're seeing an increasing number of people designing and printing from sublimation applications and not using reg marks because they're not cutting. So, they can continue to use File>Print and NOT have to remember to turn off that option while those doing actual Print+Cut can print from that other window and NOT have to remember to turn them on. :)
Sandy McCauley
Owner of http://www.iloveknk.com/
Post Reply