NEED HELP CONVERTING TO SVG PLEASE!
Posted: Sun Mar 27, 2011 1:41 pm
A friend asked if I could make a sticker for his son's baseball helmet with this logo, can someone convert this to svg for me? Thanks!
Page 1 of 1
Re: NEED HELP CONVERTING TO SVG PLEASE!
Posted: Sun Mar 27, 2011 6:47 pm
You are better off figuring out what 2 fonts it was and redrawing it. I don't see getting a good trace of it
Re: NEED HELP CONVERTING TO SVG PLEASE!
Posted: Sun Mar 27, 2011 8:19 pm
I can't say if this is going to cut well or not, but I gave it my best shot. I feel like the outlines are too thin. The baseball didn't trace that well.
So here it is. You need to ungroup and cut the "M" separately and position the "Miller & Company" over it. Hope it works out for you.
So here it is. You need to ungroup and cut the "M" separately and position the "Miller & Company" over it. Hope it works out for you.
- M&C_Baseball_rs.jpg (34.08 KiB) Viewed 1859 times
Re: NEED HELP CONVERTING TO SVG PLEASE!
Posted: Mon Mar 28, 2011 6:08 am
Thank you so much! This is so helpful! I will use a baseball that I already have. Thanks again!