Cut Settings on Sure Cuts A Lot Pro 3
Posted: Sat Oct 14, 2017 1:25 pm
I have a USCutter MH-721 MK2 using SCAL 3 Pro. I have not been able to find what all the cut settings mean in SCAL and am having a lot of issues with cutting vinyl.
Issue/s
1. I cannot find a "happy medium" to cut Oracal 631 and 651. I either don't get the vinyl words cut completely or it cuts too deep.
Troubleshooting Done
1. I have replaced the cutting strip on the machine as recommended by several forums.
2. Changed the blade.
3. Adjusted the blade LOTS of times!
4. Tried adjusting the cut settings on the machine LOTS of times!
5. Tried the multi cut option in SCAL to cut 2 times.
Anyone have any ideas or "cheat sheet" on what the settings should be on both the machine and SCAL?
Any help is much appreciated!
Issue/s
1. I cannot find a "happy medium" to cut Oracal 631 and 651. I either don't get the vinyl words cut completely or it cuts too deep.
Troubleshooting Done
1. I have replaced the cutting strip on the machine as recommended by several forums.
2. Changed the blade.
3. Adjusted the blade LOTS of times!
4. Tried adjusting the cut settings on the machine LOTS of times!
5. Tried the multi cut option in SCAL to cut 2 times.
Anyone have any ideas or "cheat sheet" on what the settings should be on both the machine and SCAL?
Any help is much appreciated!