Eclips2 not cutting all the way through paper

SCAL for the Sizzix eclips
Post Reply
cvilleartist
Posts: 1
Joined: Tue Oct 28, 2014 11:19 am

Eclips2 not cutting all the way through paper

Post by cvilleartist »

I've been using my eclips2 for about 3 years- relatively heavily. I primarily use 110- 120 lb card. Lately with even a new blade it's not cutting all the way through the paper consistently. The work is quite detailed, but it has handled it fine till now. Would a new blade holder be an appropriate fix? I'm using level 6 on the holder and 9 pressure, unsure of my options here.
papasue
Posts: 4397
Joined: Sun Mar 16, 2008 2:08 pm
Location: CALIFORNIA
Contact:

Re: Eclips2 not cutting all the way through paper

Post by papasue »

Yes a new blade holder..if it does not work I think u can return it, but check with Sizzix first .
Susan E
http://creationsbypapasue.blogspot.com
LEARN, GROW, CREATE, SHARE


Mac 10.12.6 Sierra, eCAL 1.506, ECAL2.023, SCAL4Pro, Export Plug-in, Inkscape 48, iPad/scal3
eClips2.
SandyMcC
Posts: 1114
Joined: Mon May 09, 2011 7:01 am

Re: Eclips2 not cutting all the way through paper

Post by SandyMcC »

Check the stickness of the cutting mat. If the cardstock isn't properly and completely stabilized, then those areas will not cut.
Sandy McCauley
Owner of http://www.iloveknk.com/
Post Reply