Craft Edge

Sure Cuts A Lot Forum
It is currently Wed Nov 20, 2019 9:58 pm

All times are UTC - 8 hours




Post new topic Reply to topic  [ 10 posts ] 
Author Message
PostPosted: Wed Mar 16, 2016 10:15 am 

Joined: Wed Mar 16, 2016 10:06 am
Posts: 4
Hey Guys ive been searching for the last hour trying to find help and no luck so figured id join and hope some one can point me in the right direction.


my issue.

I'm using a us cuter SC model. and sure cuts a lot 3 pro

whenever I go to cut anything. words specifically. I'm cutting a basic font over and over to fill up the roll of vinyl and my plotter seems to jump from cutting the fist letter to cutting the 3rd letter then to jumping over to the second sticker to start cutting its 1st letter, then back to the 1st sticker. It doesn't seem to have any sense of direction. Its causing the letters to overlap.

is there a setting I'm missing or something so It doesn't jump around so much?


Top
 Profile  
 
PostPosted: Wed Mar 16, 2016 10:38 am 

Joined: Sun Mar 16, 2008 2:08 pm
Posts: 4397
Location: CALIFORNIA
I am not sure I understand but I'll try. If you have typed in words:

If it is the same word over and over did you copy/paste the word or did you use duplicate
are the letters overlapping a bit or are they separated?


can you share the file you are working on as it will make it easier to diagnose.

_________________
Susan E
http://creationsbypapasue.blogspot.com
LEARN, GROW, CREATE, SHARE


Mac 10.12.6 Sierra, eCAL 1.506, ECAL2.023, SCAL4Pro, Export Plug-in, Inkscape 48, iPad/scal3
eClips2.


Top
 Profile  
 
PostPosted: Wed Mar 16, 2016 11:34 am 

Joined: Wed Mar 16, 2016 10:06 am
Posts: 4
The plotter cuts both R's
then jumps to the top to cut the stripes. Then back to cutting the lettering. It does something similar with anything else I cut.


Attachments:
rally.jpg
rally.jpg [ 120.33 KiB | Viewed 3116 times ]
Top
 Profile  
 
PostPosted: Wed Mar 16, 2016 11:37 am 

Joined: Wed Mar 16, 2016 10:06 am
Posts: 4
[imghttps://www.facebook.com/sbvinylco/photos/a.1599862780228192.1073741829.1581389345408869/1713838292163973/?type=3&theater][/img]


thisis what I'm cutting.

its cuts the R's then jumps to the top to cut the stripes, then back to the wording. Anything I cut does the same thing. Plotter just kind of jumps around to different sections to cut


Top
 Profile  
 
PostPosted: Wed Mar 16, 2016 1:57 pm 

Joined: Sun Mar 16, 2008 2:08 pm
Posts: 4397
Location: CALIFORNIA
The scal file would be more useful if you do not mind so I can see the construction and layers.

_________________
Susan E
http://creationsbypapasue.blogspot.com
LEARN, GROW, CREATE, SHARE


Mac 10.12.6 Sierra, eCAL 1.506, ECAL2.023, SCAL4Pro, Export Plug-in, Inkscape 48, iPad/scal3
eClips2.


Top
 Profile  
 
PostPosted: Wed Mar 16, 2016 4:45 pm 

Joined: Wed Mar 16, 2016 10:06 am
Posts: 4
this is the .svg file.


Attachments:
rally your heart stripes amd website.svg [41.85 KiB]
Downloaded 79 times
Top
 Profile  
 
PostPosted: Thu Mar 17, 2016 7:44 am 

Joined: Sun Mar 16, 2008 2:08 pm
Posts: 4397
Location: CALIFORNIA
I've messed with this a lot and I can get it to cut nicely but it is still jumping around. I have sent the file to Craftedge to see what they think is going on. In the meantime here is an svg that does cut although there is still some jumping around. You will have to resize it up to your desired size as I am working on an eclips that won't go that large. Try and cut this one and see how you do....I'm still curious.

I'm using the latest version of Inkscape on a Mac


Craftedge might contact you soon.


Attachments:
rallyfinal.svg [23.36 KiB]
Downloaded 69 times

_________________
Susan E
http://creationsbypapasue.blogspot.com
LEARN, GROW, CREATE, SHARE


Mac 10.12.6 Sierra, eCAL 1.506, ECAL2.023, SCAL4Pro, Export Plug-in, Inkscape 48, iPad/scal3
eClips2.
Top
 Profile  
 
PostPosted: Thu Mar 14, 2019 10:06 am 

Joined: Thu Mar 14, 2019 9:55 am
Posts: 6
Hallo, warum kann ich mit dem Hoobbycat nicht 2,5 Meter und 25cm Schrift schneiden? Es zeigt mir in der Vorschau an das nicht alles drauf ist und Plottet dann nur die Buchstaben die zu sehen sind .
Beispiel Frühjahrsangebot , das Angebot sehe ich nicht mehr dann , vieleicht hat einer ja einen Plan ???


Top
 Profile  
 
PostPosted: Fri Mar 15, 2019 6:32 am 

Joined: Mon May 09, 2011 7:01 am
Posts: 713
Die normale Version von SCAL darf nicht länger als 1,8 Meter sein. Sie benötigen die Pro-Version von SCAL, um längere Projekte zu schneide

_________________
Sandy McCauley
Owner of http://www.iloveknk.com/


Top
 Profile  
 
PostPosted: Mon Mar 18, 2019 1:30 am 

Joined: Thu Mar 14, 2019 9:55 am
Posts: 6
Ach, ja da war doch etwas ..stimmt ..nach langen hin und her hab ich es auch mitbekommen. Danke


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 8 hours


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group