Exporting registration marks for Printing in Corel Draw

Common questions/answers for new users
Post Reply
jkreddyg
Posts: 2
Joined: Tue Jan 09, 2018 2:19 am

Exporting registration marks for Printing in Corel Draw

Post by jkreddyg »

Hi,

I am using SCAL 4 with Corel Draw, I have designs which will be printed then scan and cut, How do i export exact registration marks to Corel draw and send them to the printer.

Please advise.

TIA
--
JK
SandyMcC
Posts: 1114
Joined: Mon May 09, 2011 7:01 am

Re: Exporting registration marks for Printing in Corel Draw

Post by SandyMcC »

This is a quick answer to what will probably be a little more involved.

There are two ways to export the reg marks: Use SVG which has an option to add the SCAL reg marks. Or you can use a Print to PDF option, such as Microsoft Print to PDF or the similar one that's part of Mac's O/S and make sure mark the Print registration marks option in the print settings window.
Sandy McCauley
Owner of http://www.iloveknk.com/
jkreddyg
Posts: 2
Joined: Tue Jan 09, 2018 2:19 am

Re: Exporting registration marks for Printing in Corel Draw

Post by jkreddyg »

Hi Sandy,

Thanks for the reply, One question is all my designs are in CMYK, but when i import and export from SCAL the output is in RGB. I do not see any option to change that, Any advise. Thanks.
SandyMcC
Posts: 1114
Joined: Mon May 09, 2011 7:01 am

Re: Exporting registration marks for Printing in Corel Draw

Post by SandyMcC »

Yes, and this is the number one reason why Corel Draw and Illustrator owners will often prefer to use those programs for printing their PNC projects. Thus, the reason why I mentioned two ways to get your registration marks exported to Corel Draw.

I wrote up a detailed method that we recommend for those who own KNK cutters (the ones I support). It's Section 11.07 in this user manual and it SHOULD work for you, even though I don't know which cutter you own.

http://www.iloveknk.com/0um/ZingOrbit-w ... CAL-UM.pdf
Sandy McCauley
Owner of http://www.iloveknk.com/
Post Reply