Hi, I was cutting a design. The PC said : cutting data was send to computer". Cutter is not starting but on cutter says "Cutting", but nothing moves. No one touch on the cutter was re-acting by pressing it. I tried with less images/texts than it was working.
I had to stop the cutter by switching -off the voltage.
I work with sure cuts a lot 4 . Windows 10 version on laptop
I have the question: is the cutter fault, or the data transfer from the computer (via USB).
Who can help me?
send for cutting but is not cutting
Re: send for cutting but is not cutting
You're more likely to get a response if you mention what cutter (brand and model) you own. Then hopefully one of the members here who owns the same cutter might have some suggestions.
Sandy McCauley
Owner of http://www.iloveknk.com/
Owner of http://www.iloveknk.com/
Re: send for cutting but is not cutting
Ay, i forgot...its the gcc i - Craft cutter 1.5 month old onlySandyMcC wrote:You're more likely to get a response if you mention what cutter (brand and model) you own. Then hopefully one of the members here who owns the same cutter might have some suggestions.
Re: send for cutting but is not cutting
Since I don't know the GCC cutters, I can't help. But I see you found the other thread. Good luck!
Sandy McCauley
Owner of http://www.iloveknk.com/
Owner of http://www.iloveknk.com/