Which version(s) can be used with the Cricut?

For your help and questions
Post Reply
createdog
Posts: 1
Joined: Mon Mar 27, 2017 2:02 pm

Which version(s) can be used with the Cricut?

Post by createdog »

I have the older Cricut machine? Which version can I use?
I'm also considering upgrading to a Cricut Explore. Does this software work with that?

craftedge
Site Admin
Posts: 353
Joined: Tue Jul 05, 2011 10:34 pm

Re: Which version(s) can be used with the Cricut?

Post by craftedge »

If you are using the Cricut Explore models you will be able to do this with version 4 of Sure Cuts A Lot
https://www.craftedge.com/tutorials/des ... nspace.php

Version 2 of Sure Cuts A Lot was the last version we created to cut directly with the older Cricut models (Personal, Expression, Create, Cake).
Sales of version 2 ended in 2011, but if you had purchased that version back then, you can use the latest version 4 of Sure Cuts A Lot to create your design and then send it to version 2 for cutting as shown here
https://www.craftedge.com/tutorials/sen ... oscal2.php

createdog
Posts: 1
Joined: Mon Mar 27, 2017 2:02 pm

Re: Which version(s) can be used with the Cricut?

Post by createdog »

Thanks for the information.

I also noticed there was another post on getting SCAL4 to work with the older Cricut models using a separate plugin here
viewtopic.php?f=6&t=42102

I tried it out and this worked!

I will be able to get a little extra life out of my old Cricut and then probably upgrade to their newer Explore.

GlebIN
Posts: 1
Joined: Thu Feb 07, 2019 7:24 pm

Which versions can be used with the Cricut

Post by GlebIN »

Hello all Juniper experts,
Which Juniper AP model is similar hardware & performance level with Cisco AP 1600 ?


Which OS the Juniper AP would run on ?
Junos or screenOS ?


Thanks very much


Regards,
Roc

SandyMcC
Posts: 834
Joined: Mon May 09, 2011 7:01 am

Re: Which version(s) can be used with the Cricut?

Post by SandyMcC »

This forum is for users of Sure Cuts A Lot Software. You need to find a different forum to in order to reach owners/experts in the Juniper. Good luck!
Sandy McCauley
Owner of http://www.iloveknk.com/

Post Reply