Need help with weld or union, not sure which for this image

For your help and questions
Post Reply
bunnyhop24
Posts: 18
Joined: Tue Jun 21, 2016 5:18 am

Need help with weld or union, not sure which for this image

Post by bunnyhop24 »

I need to combine these two rectangles so that the line along the bottom where they meet is not cut. So the segment of the line where they touch (where the red arrow is pointing) is not there. I've tried weld, union, group/ungroup, etc. All of these make the smaller rectangle disappear. What am I doing wrong? I'm using SCAL4.
Attachments
Screen Shot 2017-03-24 at 12.49.10 PM.png
Screen Shot 2017-03-24 at 12.49.10 PM.png (13.8 KiB) Viewed 2358 times
papasue
Posts: 4397
Joined: Sun Mar 16, 2008 2:08 pm
Location: CALIFORNIA
Contact:

Re: Need help with weld or union, not sure which for this im

Post by papasue »

Try it this way. Let us know if this works for you.
Screen Shot 2017-03-24 at 11.10.22 AM.png
Screen Shot 2017-03-24 at 11.10.22 AM.png (33.73 KiB) Viewed 2351 times
Susan E
http://creationsbypapasue.blogspot.com
LEARN, GROW, CREATE, SHARE


Mac 10.12.6 Sierra, eCAL 1.506, ECAL2.023, SCAL4Pro, Export Plug-in, Inkscape 48, iPad/scal3
eClips2.
bunnyhop24
Posts: 18
Joined: Tue Jun 21, 2016 5:18 am

Re: Need help with weld or union, not sure which for this im

Post by bunnyhop24 »

Yes thank you so much!
Post Reply