Scan2Cut

Discuss various cutting machines for SCAL
craftedge
Site Admin
Posts: 360
Joined: Tue Jul 05, 2011 10:34 pm

Scan2Cut

Post by craftedge »

In the latest updates for SCAL4 and eCAL2, there has been a Scan2Cut option added.
This is similar to a Print+Cut, but is a process to allow you to cut pre-printed/drawn/stamped shapes.
This is designed to work with cutting machines that have a laser for doing the manual Print+Cut.

Here is an overview, thanks to Sandra

http://createinspain.blogspot.com.es/20 ... 7-and.html
Lynda Carpenter
Posts: 4
Joined: Mon Jan 09, 2012 3:06 am

Re: Scan2Cut

Post by Lynda Carpenter »

Thanks so much!
Rorysnonna
Posts: 54
Joined: Sun Mar 02, 2008 12:01 pm
Location: Here in Jersey
Contact:

Re: Scan2Cut

Post by Rorysnonna »

Hi All,
Do I need to calibrate my laser for each time I do a print and cut? I just tried this feature and it worked fantastic. I mostly cut tag shapes over a printed image. This works better than my Brother SnC. So happy you have added the Zing driver to the software.
cpking
Posts: 30
Joined: Thu Dec 24, 2015 1:11 pm
Contact:

Re: Scan2Cut

Post by cpking »

Thanks for sharing.
graphicspath
Posts: 11
Joined: Tue Feb 23, 2016 3:17 am

Re: Scan2Cut

Post by graphicspath »

Thank you for informative sharing
Prifead
Posts: 2
Joined: Tue Jul 05, 2016 5:28 am
Location: Hartford, NY

Re: Scan2Cut

Post by Prifead »

Thanks for sharing :roll:
RACHELALLAN
Posts: 3
Joined: Thu Jan 19, 2017 3:26 am

Re: Scan2Cut

Post by RACHELALLAN »

Thanks for Shearing
velis17
Posts: 1
Joined: Mon Feb 13, 2017 8:57 am

Re: Scan2Cut

Post by velis17 »

Can anyone tell me what a "SCUT" file is? thanks
SandyMcC
Posts: 1114
Joined: Mon May 09, 2011 7:01 am

Re: Scan2Cut

Post by SandyMcC »

SCUT is the original file format for Sure Cuts a Lot. In other words, you can use File>Open to open any scut file.
Sandy McCauley
Owner of http://www.iloveknk.com/
RACHELALLAN
Posts: 3
Joined: Thu Jan 19, 2017 3:26 am

Re: Scan2Cut

Post by RACHELALLAN »

Thanks for this information
Post Reply