How to open a WPC file in Sure Cuts A Lot Pro 3

For your help and questions
Post Reply
scrapyQ
Posts: 39
Joined: Wed Oct 31, 2012 9:20 am

How to open a WPC file in Sure Cuts A Lot Pro 3

Post by scrapyQ »

Hi my name is Susan, I own a Pazzles Inspirations cutter and I use both the Pazzles software and Sure Cuts A Lot 3 Pro when I'm designing. I am in the process of starting a blog where I would like to share my designs both for free and for purchase. I realize in looking at others that share and sell there designs that there are a few file types that I will need to offer them in. I know that my basic Pazzles software will only open a WPC file and with my Sure Cuts A Lot I am able to use SVG files and I know that I have the option to save SVG files with it as well. I have several designs that I have done with my Pazzles software and I would like to save them a SVG files but I have had no luck in trying to open them in my Sure Cuts A Lot software. Can anyone help me with this or if you could send me in the right direction it would be greatly appreciated... :D

Thank you so much
Susan :D
gj1
Posts: 4465
Joined: Mon Oct 12, 2009 5:01 am

Re: How to open a WPC file in Sure Cuts A Lot Pro 3

Post by gj1 »

Welcome, sorry I don't know...sending this to the top for an answer.
My pictures and files are available for a limited time only.
gj1
Posts: 4465
Joined: Mon Oct 12, 2009 5:01 am

Re: How to open a WPC file in Sure Cuts A Lot Pro 3

Post by gj1 »

http://www.youtube.com/watch?v=6Y19HwP9IW8

I knew there was a way...here is a video to explain.
My pictures and files are available for a limited time only.
craftedge
Site Admin
Posts: 360
Joined: Tue Jul 05, 2011 10:34 pm

Re: How to open a WPC file in Sure Cuts A Lot Pro 3

Post by craftedge »

WPC is partially supported.
If you would like to try it out with your files, please install this one
http://www.craftedge.com/bin/SetupSureC ... 045wpc.exe
scrapyQ
Posts: 39
Joined: Wed Oct 31, 2012 9:20 am

Re: How to open a WPC file in Sure Cuts A Lot Pro 3

Post by scrapyQ »

Thank you so much for your help I was able to get it to work...come on by and check out the my new blog and let me know if there were any problems with my file down load... :D

Thanks all again so much.

http://scrapyq.blogspot.ca/

Scrapy Q
Image
Post Reply