Hi everyone,
I am having trouble with my cuts not lining up on the 2nd cut. I have cleaned the blade and adjustef the speed but it doesn't help. Is there a default setting for expressions? Maybe the housing is off?
Thanks for any tips
Margo
Multi-cuts not lining up.. Pls assist
Re: Multi-cuts not lining up.. Pls assist
http://craftedge.com/support/lostsw.php
Make sure you have the latest version above, and
you can go to the site for your cutter and get information about resetting the machine...I can remember how to explain it. If you search this forum, you may find instructions, also, for resetting the machine to default position...I guess that is what it does.
Make sure you have the latest version above, and
you can go to the site for your cutter and get information about resetting the machine...I can remember how to explain it. If you search this forum, you may find instructions, also, for resetting the machine to default position...I guess that is what it does.
My pictures and files are available for a limited time only.
Re: Multi-cuts not lining up.. Pls assist
Thanks a bunch. I did some research and found this link for anyone that might have this problem in the future.
http://www.ehow.com/how_5795800_reset-c ... ssion.html
http://www.ehow.com/how_5795800_reset-c ... ssion.html
-
- Posts: 1964
- Joined: Wed Dec 01, 2010 4:29 pm
- Location: Sandy in PA (PC&MAC,Inkscape .48, SCAL2,eClips, eCAL)
Re: Multi-cuts not lining up.. Pls assist
I didn't read the entire link you posted, but when you do the reset feature it states the expression goes back to all of the factory default settings. Don't know if that affects the firmware or not?? If you use SCAL, you might want to check that out too.
Sandy in PA
Re: Multi-cuts not lining up.. Pls assist
That was one thing I hated about the expressions and provocraft machine you could all most never recut in the same place twice no matter what. I don't think it is your housing but in fact it is the way the machine is tracking back and forth on the mats is not perfect so cut are not always perfect the larger the design the more it will be off.
Re: Multi-cuts not lining up.. Pls assist
If your mat edges are curling it can throw things off too.
My pictures and files are available for a limited time only.