Page 1 of 1

Cutting Vinyl with SCAL without or no mat in Cameo

Posted: Sat Jul 27, 2013 3:33 am
by gofree
As in SCAL, there is no option for 'No Mat' like one in SSDE, cutting let's say 12" x 24" vinyl will cause not cut on the right edge or slip-through at the bottom if your design is filled the page.
Here I am attaching the picture of the size and placement that your design should be which you will have to leave 3 grids on the right and 6 grids at the bottom.

If you are cutting your design from its roll, then you can fill it to the bottom with no issue.

Re: Cutting Vinyl with SCAL without or no mat in Cameo

Posted: Wed Jul 31, 2013 4:42 am
by gmapatty
Thank you, I did not know this.