Cutting Vinyl with SCAL without or no mat in Cameo

Share your Sure Cuts A Lot Projects (.scut, .scut2,.scut3,.scut4)
Post Reply
gofree
Posts: 2
Joined: Mon Aug 27, 2012 3:11 am

Cutting Vinyl with SCAL without or no mat in Cameo

Post by gofree »

As in SCAL, there is no option for 'No Mat' like one in SSDE, cutting let's say 12" x 24" vinyl will cause not cut on the right edge or slip-through at the bottom if your design is filled the page.
Here I am attaching the picture of the size and placement that your design should be which you will have to leave 3 grids on the right and 6 grids at the bottom.

If you are cutting your design from its roll, then you can fill it to the bottom with no issue.
Attachments
cutting vinyl with SCAL.JPG
cutting vinyl with SCAL.JPG (270.55 KiB) Viewed 3514 times
gmapatty
Posts: 141
Joined: Thu Feb 04, 2010 5:09 am

Re: Cutting Vinyl with SCAL without or no mat in Cameo

Post by gmapatty »

Thank you, I did not know this.
Post Reply