Vinyl gets jammed on Professional 24"

Tips, Tricks and Tutorials for using Sure Cuts A Lot
Post Reply
gdeadtoo
Posts: 2
Joined: Sun Dec 13, 2020 12:53 pm

Vinyl gets jammed on Professional 24"

Post by gdeadtoo »

I'm using Stahl 15" easy weed and no matter where I position it on the cutter, when the cut is just about finished, and when the blade gets to the right side, and the vinyl starts to go backwards, it starts to bunch up. I'm at pressure: 10, speed 25. Any ideas what's happening

SandyMcC
Posts: 912
Joined: Mon May 09, 2011 7:01 am

Re: Vinyl gets jammed on Professional 24"

Post by SandyMcC »

The first thing I would check are the pinch wheels and the grits shafts beneath. Make sure they are clean and not sticky at all.

If this is ONLY happening with Easy Weed and not other HTV or regular vinyl, then I would contact Stahl's directly for assistance since it's their product.
Sandy McCauley
Owner of http://www.iloveknk.com/

gdeadtoo
Posts: 2
Joined: Sun Dec 13, 2020 12:53 pm

Re: Vinyl gets jammed on Professional 24"

Post by gdeadtoo »

Thanks, I will check it out.

Post Reply