Cut Settings SCAL

Discuss various cutting machines for SCAL
Post Reply
alyzamarie_24
Posts: 3
Joined: Sun Mar 10, 2019 9:31 pm

Cut Settings SCAL

Post by alyzamarie_24 »

I'm so forgetful, sorry for asking this.. I want to cut a vinyl sticker but I forgot whether the preset should be heat transfer or sign vinyl. I've attached a picture so you can see the options...
Attachments
11111.PNG
11111.PNG (51.25 KiB) Viewed 7405 times
SandyMcC
Posts: 1114
Joined: Mon May 09, 2011 7:01 am

Re: Cut Settings SCAL

Post by SandyMcC »

Well, if you only need to peel off a paper backing in order to apply the sticker, then you'd select Sign Vinyl. But if you need to use a heat press or your home iron in order to activate the adhesive, then you'd pick Heat Transfer.
Sandy McCauley
Owner of http://www.iloveknk.com/
copyshop27
Posts: 6
Joined: Thu Mar 14, 2019 9:55 am

Re: Cut Settings SCAL

Post by copyshop27 »

Hallo Ihr lieben, ich bin am verzweifeln, ich möchte ein Schriftzug 2,5 Meter Plotten als ich stell da 250.000 cm ein.
Die Breite 25 cm soweit so gut. Wenn ich jetzt auf Plotten gehen würde ist der Schriftzug nicht in voller länge drauf, das kann doch nicht normal sein?? Ich hoffe Ihr könnt helfen, Vielen Dank
Beispiel Frühlingsangebot soll 2,5 Meter lang werden und 25cm hoch , vieleicht übersehe ich ja etwas???
SandyMcC
Posts: 1114
Joined: Mon May 09, 2011 7:01 am

Re: Cut Settings SCAL

Post by SandyMcC »

Ich spreche kein Deutsch, also verwende ich Google Translate, um mein Englisch für Sie in Deutsch zu übersetzen.

Verwenden Sie die SCAL Pro-Version? Wenn Sie die normale Version haben, schneidet sie nur bis zu 1,8 Meter.
Sandy McCauley
Owner of http://www.iloveknk.com/
copyshop27
Posts: 6
Joined: Thu Mar 14, 2019 9:55 am

Re: Cut Settings SCAL

Post by copyshop27 »

Danke für die Hilfe, hab das Problem schon gelöst, geht ja nur mit der Software 1,8 Meter ..Lg ..
SandyMcC
Posts: 1114
Joined: Mon May 09, 2011 7:01 am

Re: Cut Settings SCAL

Post by SandyMcC »

Bitte.
Sandy McCauley
Owner of http://www.iloveknk.com/
copyshop27
Posts: 6
Joined: Thu Mar 14, 2019 9:55 am

Re: Cut Settings SCAL

Post by copyshop27 »

Hallo Ihr lieben, hier mal ein Foto von mir. Ich bekomme den Rand einfach nicht weg....könnte mir jemand ein Tipp geben wie ich diesen weg bekomme?
Jedesmal wenn ich mit dem Radierer den weg mache bleibt er dennoch zu sehen
Attachments
umrisse weg bekommen..jpg
umrisse weg bekommen..jpg (255.41 KiB) Viewed 7260 times
SandyMcC
Posts: 1114
Joined: Mon May 09, 2011 7:01 am

Re: Cut Settings SCAL

Post by SandyMcC »

d3.png
d3.png (58.62 KiB) Viewed 7258 times
Sandy McCauley
Owner of http://www.iloveknk.com/
Post Reply