Craft Edge

Please try to download and install again (version 4.049)
http://www.craftedge.com/download

From the Cutter menu, choose Manage Cutters and add USCutter -> Titan.

You can then go to the Cutter menu and choose Cut with USCutter to send your design to the Titan for cutting.

L = light, M = medium, H = hard

Please contact support@craftedge.com as we will need to gather further information about your cutting machine and your computer to offer suggestions on settings to you use.

You will first need to add your cutting machine model by choosing Manage Cutters from the Cutter menu.
After that when you go to the Cutter menu and choose to Cut with...
you will get the cutter settings where you can set the Cut by color settings.

The Draw tool allows you to draw your own shapes using lines and curves. You can also use the Draw tool to add and remove nodes from a shape. To use the Draw tool, first select the Draw tool from the Tools panel. http://www.craftedge.com/tutorials/draw_tool/drawtool.gif To draw lines, just click whe...

The Edit tool allows you to edit shape by dragging nodes and edges. To use the Edit tool, first select the Edit tool from the Tools panel. http://www.craftedge.com/tutorials/edit_tool/edittool.gif You can hover over an edge and drag to move it. Below is an example of moving a straight edge. http://w...

Can you please send one of your projects files to support@craftedge.com and we will check out the problem.

The text on path will stop at the end point of the path. So where you see the letters are overlapping is the end of the path.
You will need to adjust the Path Start Offset value in the Text settings area to start more towards the beginning of the path.

You will need to make sure the step size set on the Graphtec matches what is set in the software. For example, if the Graphtec is set to 508, but the software is set to 1016, the cutting size will be off by 2 times. In the software, you can hit Cut to bring up the cut window, then click the Settings...